原著論文
2025年
- Short-time peeling of large anodic porous alumina membranes from Al substrates by two-layer anodization using concentrated sulfuric acid
M. Kuroiwa, and T. Yanagishita*, J. Electrochem. Soc., 172, 013506 (2025).
2024年
- Evaluation of the antibacterial and cell culture properties of anodic porous alumina prepared in concentrated H2SO4
T. Murata, K. Yamaguchi, and T. Yanagishita*, Langmuir, 40, 26706 (2024).[Supplementary Cover Art]
- Fabrication of Ordered Nanohole Arrays by Anodization of Sn Substrates with Ordered Dimple Patterns Formed Using Porous Alumina Template
K. Umeki, and T. Yanagishita*, J. Electrochem. Soc., 171, 113508 (2024).
- Effects of Heat Treatment on Anodic Porous Alumina Membranes for Mass Spectrometry
M. Kotani* and T. Yanagishita, ECS J. Solid State Sci. Technol., 13, 094003 (2024).
- Fabrication of Porous Metal Particles with Controlled Surface Structures by Barrel Anode Etching
T. Yanagishita*, S. Ueno, T. Kondo, and H. Masuda, J. Electrochem. Soc., 171, 093501 (2024).
- Preparation of ordered nanohole arrays by two-step anodization of austenitic stainless steel substrates
Y. Osada, S. Teshima, H. Munakata, and T. Yanagishita*, Langmuir, 40, 18338 (2024).[Supplementary Cover Art]
- Highly permeable alumina membrane with mechanical durability
Y. Boushi and T. Yanagishita*, ACS Appl. Eng. Mater., 2, 2227 (2024).[Supplementary Cover Art]
- Antimicrobial activity of anodic porous alumina with controlled surface structures
T. Murata, K. Yamaguchi, and T. Yanagishita*, Langmuir, 40, 17118 (2024).[Supplementary Cover Art]
- Preparation of Ordered Fe3O4 Nanohoneycombs and Their Application in Capacitors
Y. Osada and T. Yanagishita*, ECS J. Solid State Sci. Technol., 13, 043007 (2024).
- Effects of pore arrangement of TiO2-coated porous alumina membranes on photocatalytic properties
H. Itoh and T. Yanagishita*, J. Phys. Chem. C, 128, 6478 (2024).[Supplementary Cover Art]
- Preparation of alumina membrane filters with framework structures by Al anodization
Y. Boushi and T. Yanagishita*, Langmuir, 40, 5278 (2024).[Supplementary Cover Art]
- Control of water droplet transport using anodic porous alumina with wettability gradient
Y. Boushi and T. Yanagishita*, Langmuir, 40, 5455 (2024).[Supplementary Cover Art]
- Anodic Porous Alumina Membranes with Chemical Stability Improved by Atomic Layer Deposition Coating of TiO2
H. Itoh and T. Yanagishita*, ECS J. Solid State Sci. Technol., 13, 023002 (2024).
2023年
- Preparation of ordered nanostructures by anodization of Ag substrate with depression patterns
S. Teshima and T. Yanagishita*, J. Electrochem. Soc., 170, 123503 (2023).
- Flat and roll-type translucent anodic porous alumina molds anodized in oxalic acid for UV nanoimprint lithography
T. Yanagishita*, N. Kumagai, and H. Masuda, RSC Adv., 13, 33231 (2023).
- Anisotropic Plasmonic Property of Al Nanowires Obtained by AC Electrodeposition Using Anodic Porous Alumina Template
T. Kondo*, T. Sano, T. Yanagishita, and H. Masuda, J. Phys. Chem. C, 127, 21629 (2023). [Supplementary Cover Art]
- Fabrication of nanoparticle assemblies with a controlled number of constituent nanoparticles by membrane emulsification using anodic porous alumina
T. Yanagishita*, K. Yuda, T. Kondo, and H. Masuda, Mater. Adv., 4, 4369 (2023).[Inside Front Cover]
- Effects of anodization conditions of stainless steel on the formation of ordered nanoporous structures with high aspect ratios
Y. Osada and T. Yanagishita*, Nanotechnology, 34, 465601 (2023).
- Investigation of conditions for preparation of ordered nanohole arrays by anodization of iron substrates with depression patterns
Y. Osada and T. Yanagishita*, J. Electrochem. Soc., 170, 063510 (2023).
- Preparation of antireflection structures with heat resistance by nanoimprinting using anodic porous alumina molds
T. Yanagishita*, R. Ooe, Y. Ishibashi, and T. Mitsuru, Jpn. J. Appl. Phys., 62, 068002 (2023).
- Preparation of Size-controlled LiCoPO4 Particles by Membrane Emulsification Using Anodic Porous Alumina and Their Application as Cathode Active Materials for Li-ion Secondary Batteries
T. Yanagishita*, R. Otomo, and H. Masuda, RSC Adv., 13, 16549 (2023).
- Fabrication of moth-eye structures with precisely controlled shapes by nanoimprinting using anodic porous alumina molds
T. Yanagishita*, M. Etani, and T. Kondo, J. Electrochem. Soc., 170, 063501 (2023).
- Preparation of polymer nanopillar arrays with controlled tip shapes and their application to hydrophobic and oleophobic surfaces
T. Yanagishita*, M. Kurita, Langmuir, 39, 8540 (2023).[Supplementary Cover Art]
- Fabrication of Ideally Ordered Anodic Porous Alumina on Glass Substrates by Stamping Process Using Flexible Stamps
K. Kato and T. Yanagishita*, ECS Adv.,2, 022501 (2023).
- Continuous Spinning of Polymer Nanofibers with Uniform Diameters Using Anodic Porous Alumina Spinneret with Holes of Different Diameters
T. Yanagishita*, A. Koga, and H. Masud, Mater. Adv.Adv., 4,890 (2023).[Inside Front Cover]
- Preparation of anodic porous alumina with gradient hole size for directional droplet transport
T. Yanagishita* and Y. Boushi, Langmuir, 39, 862 (2023). [Supplementary Cover Art]
2022年
- Effect of fine structures formed by nanoimprinting using anodic porous alumina mold on surface hydrophobicity
T. Yanagishita*, K. Murakoshi, and H. Masuda, ECS J. Solid State Sci. Technol., 11, 103004 (2022).
- Electrodeposition and Electrodissolution of Li Metal in Nanohole Arrays of Anodic Porous Alumina
T. Kondo*, M. Yoshida, T. Yanagishita, and H. Masuda, J. Electrochem. Soc., 169, 092507 (2022).
- Dependence of Size Distribution of Nanoparticles on Hole Size Uniformity in Membrane Emulsification
T. Yanagishita*, Y. Maejima, and H. Masuda, Mater. Res. Express., 9, 086404 (2022).
- Micro-Nano Hierarchical Pillar Array Structures Prepared on Curved Surfaces by Nanoimprinting Using Flexible Molds from Anodic Porous Alumina and Their Application to Superhydrophobic Surfaces
T. Yanagishita*, T. Sou, and H. Masuda, RSC Adv., 12, 20340 (2022).
- Pretexturing and Anodization of W for Fabricating Ordered Anodic Porous WO3
T. Yanagishita*, T. Masuda, and H. Masuda, J. Electrochem. Soc., 169, 072504 (2022).
- Highly ordered anodic porous alumina prepared by anodization of Al in extremely dilute H2SO4
T. Yanagishita*, R. Kawato, and H. Masuda, J. Electrochem. Soc., 169, 073504 (2022).
- Preparation of ordered nanohole arrays with high aspect ratios by anodization of prepatterned 304 stainless steel
T. Yanagishita*, Y. Osada, T. Masuda, and H. Masuda, J. Electrochem. Soc., 169, 063502 (2022).
- Preparation of Ordered Nanohole Array Structures by Anodization of Prepatterned Cu, Zn, and Ni
T. Yanagishita*, T. Masuda, and H. Masuda, RSC Adv., 12, 6848 (2022).
- Preparation of Moth-Eye Structures on Curved Surfaces by Nanoimprinting Using Anodic Porous Alumina Molds
T. Yanagishita*, M. Omata, and H. Masuda, Jpn. J. Appl. Phys., 61, 038001 (2022).
- Nanopillar Polymer Films as Antibacterial Packaging Materials
D. Linklater, S. Saita,T. Murata, T. Yanagishita, C. Dekiwadia, R. Crawford, H. Masuda, H. Kusaka, and E. Ivanova*, ACS Applied Nano Materials, 5, 2578 (2022).
- Efficient Fabrication of Ordered Alumina Through-Hole Membranes Using TiO2 Protective Layer Prepared by Atomic Layer Deposition
T. Yanagishita*, H. Itoh, and H. Masuda, RSC Adv., 12, 3662 (2022).
- Formation of ideally ordered porous Ga oxide by anodization of pretextured Ga
T. Kondo*, Y. Kuroda, T. Shichijo, T. Yanagishita, and H. Masuda, J. Vaccum. Sci. Technol. B, 40, 010603 (2022).
- Preparation of Ideally Ordered Anodic Porous Alumina by Prepatterning Process Using a Flexible Mold
T. Yanagishita*, K. Kato, N. Shirano, and H. Masuda, ECS J. Solid State Sci. Technol., 11, 013001 (2022).
2021年
- Ideally ordered anodic porous alumina on Si substrate prepared by anodization of sputtered Al-Mg thin film
T. Yanagishita*, K. Kikkawa, and H. Masuda, ECS J. Solid State Sci. Technol., 10, 115002 (2021).
- Template-Free Preparation of Metal Nanowires by Two-Phase Electrolysis Using Cells Composed of Water and Oil Phases
T. Yanagishita*, Y. Nishioka, S. Miwa, H. Masuda, and Y. Komoda, J. Electrochem. Soc., 168, 093502 (2021).
- Renewable Superhydrophobic Surfaces Prepared by Nanoimprinting Using Anodic Porous Alumina Molds
T. Yanagishita*, M. Yoshida, and H. Masuda, Langmuir, 37, 10573 (2021).
- Preparation of Ordered Anodic Porous Alumina with Single-Nanometer-Order-Size Holes by Atomic Layer Deposition
T. Yanagishita*, M. Otsuka, T. Takei, U. Seigo, and H. Masuda, Langmuir, 37, 8331 (2021).
- Fabrication of Li Nanohole Array by Replication Process Using Anodic Porous Alumina Template
T. Kondo*, M. Yoshida, T. Yanagishita, and H. Masuda, J. Electrochem. Soc., 168, 032508 (2021).
- Formation of Ideally Ordered Anodic Porous Zirconia by Anodization of Vacuum-Deposited Zr on Molds
T. Kondo*, T. Tamura, T. Yanagishita, and H. Masuda, J. Vaccum. Sci. Technol. B, 39, 020601 (2021).
- Monodisperse albumin particles fabricated by membrane emulsification using anodic porous alumina
T. Yanagishita*, R. Asami, and H. Masuda, Mater. Res. Express, 8, 025003 (2021).
- Self-Ordered Anodic Porous Alumina with Inter-Hole Spacing Over 1.5 µm
T. Yanagishita*, R. Moriyasu, T. Ishii, and H. Masuda, RSC Adv., 11, 3777 (2021).
- Highly Ordered Alumina Through-Hole Membranes Having Reduced Hole Intervals: 30–50 nm
T. Yanagishita*, A. Kato, T. Nakamura, and H. Masuda, ECS J. Solid State Sci. Technol., 10, 013007 (2021).
- Highly ordered anodic porous oxide of transition metals fabricated by anodization combined with pretexturing process
T. Yanagishita*, T. Masuda, T. Kondo, and H. Masuda, Electrochem. Commun., 123, 106916 (2021).
- Preparation of Ni Micropillar Arrays with High Aspect Ratios Using Anodic Porous Alumina Template and Their Application to Molds for Imprinting
T. Yanagishita*, T. Hayakawa, T. Kondo, and H. Masuda, RSC Adv., 11, 2096 (2021).
- Fabrication of Metal Nanorod Arrays Using Anodic Porous Alumina Mask with Elliptical Apertures Prepared by Lattice Conversion Process
T. Kondo*, H. Miyazaki, T. Yanagishita, and H. Masuda, Jpn. J. Appl. Phys., 60, 010907 (2021).
- SnO2 Nanofibers Prepared by Wet Spinning Using an Ordered Porous Alumina Spinneret
T. Yanagishita*, H. Takai, T. Kondo, and H. Masuda, Nanotechnology, 32, 145603 (2021).
- Structure size effect on polymer infiltration in injection mold direct joining
S. Kadoya, F. Kimura, T. Yanagishita, and T. Kajihara*, Precision Engineering, 67, 100 (2021).
2020年
- Preparation of ordered porous alumina through-hole membranes with large hole periods by two-layer anodization
T. Yanagishita*, M. Ozaki, R. Kawato, A. Kato, T. Kondo, and H. Masuda, J. Electrochem. Soc., 167, 163502 (2020).
- Fabrication of ideally ordered TiO2 through-hole membranes by two-layer anodization
T. Yanagishita*, H. Hirose, T. Kondo, P. Schmuki, and H. Masuda, RSC Adv., 10, 37657 (2020).。
- Preparation of multilayered porous alumina hollow spheres by anodization of Al particles
T. Yanagishita*, R. Sato, T. Kondo, and H. Masuda, Electrochem. Commun., 120, 106848 (2020).
- Preparation of freestanding tubular alumina through-hole membranes by two-layer anodization
T. Yanagishita*, A. Kato, and H. Masuda, Jpn. J. Appl. Phys., 59, 038002 (2020).
2019年
- One-pod preparation of anodic porous alumina molds with tapered holes for moth-eye structures by nanoimprinting
T. Yanagishita*, G. Otani, H. Onomoto, T. Kondo, H. Masuda, Jpn. J. Appl. Phys., 58, 68005 (2019).
- Preparation of polymer nanofibers with controlled diameters by continuous spinning using ordered anodic porous alumina as spinneret
T. Yanagishita*, H. Awata, K. Kobayashi, T. Kondo, H. Masuda, Chem. Lett., 48, 86 (2019).
- Anodic porous alumina with elliptical apertures
T. Kondo*, H. Miyazaki, T. Yanagishita, H. Masuda, Electrochem. Commun., 96, 61 (2019).
2018年
- Control of thermal radiation in metal hole array structures formed by anisotropic anodic etching of Al
T. Kondo*, S. Hasegawa, T. Yanagishita, N. Kimura, T. Toyonaga, H. Masuda, Optics Express, 26, 27865 (2018).
- Preparation of renewable antireflection moth-eye surfaces by nanoimprinting using anodic porous alumina molds
T. Yanagishita*, T. Kondo, H. Masuda, J. Vac. Sci. Technol. B, 36, 31802 (2018).
- Selective through-holing of anodic porous alumina membranes with large area
T. Yanagishita*, Y. Okubo, T. Kondo, H. Masuda, RSC Adv., 8, 37890 (2018).
- Preparation of superhydrophobic surfaces with micro/nano hierarchical structures by nanoimprinting using anodic porous alumina molds
T. Yanagishita*, T. Murakoshi, T. Kondo, H. Masuda, RSC Adv., 8, 2041 (2018).
- Preparation of monodisperse LiCoO2 hollow particles by membrane emulsification using anodic porous alumina
T. Yanagishita*, T. Inoue, T. Kondo, H. Masuda, Chem. Lett., 47, 551 (2018).
- Preparation of nanoporous alumina hollow spheres with a highly ordered hole arrangement
T. Yanagishita*, M. Imaizumi, T. Kondo, H. Masuda, RSC Adv., 8, 2041 (2018).
- Efficient preparation process for TiO2 through-hole membranes with ordered hole arrangements
T. Yanagishita*, H. Inada, T. Kondo, N.T. Nguyen, P. Schmuki, H. Masuda, J. Electrochem. Soc., 165, E763 (2018).
2017年以前
- Anodic porous alumina with square holes through lattice conversion of naturally occurring ordered structures
T. Kondo*, H. Miyazaki, T. Yanagishita, H. Masuda, J. Vac. Sci. Technol. B, 35, 50602 (2017).
- Optimizing TiO2 nanotube morphology for enhanced photocatalytic H2 evolution using single-walled and highly ordered TiO2 nanotubes decorated with dewetted Au nanoparticles
N.T. Nguyen, I. Hwang, T. Kondo, T. Yanagishita, H. Masuda, P. Schmuki*, Electrochem. Commun., 79, 46 (2017).
- Tuning of the interval in a nanohole array of anodic porous alumina through deformation of polymer templates
T. Kondo*, S. Nagao, H. Miyazaki, T. Yanagishita, and H. Masuda, RSC Adv., 7, 44799 (2017).
- Formation of Porous Al Particles by Anisotropic Anodic Etching
T. Yanagishita*, M. Imaizumi, T. Kondo, and H. Masuda, Electrochem. Commun., 78, 26 (2017).
- Preparation of Ideally Ordered Through-Hole Anodic Porous Alumina Membranes by Two-Layer Anodization
T. Yanagishita*, A. Kato, and H. Masuda, Jpn. J. Appl. Phys., 56, 035202 (2017).
- Fabrication of Ideally Ordered Anodic Porous TiO2 by Anodization of Pretextured Two-Layered Metals
T. Kondo*, S. Nagao, S. Hirano, T. Yanagishita, N. T. Nguyen, P. Schmuki, and H. Masuda, Electrochem. Commun, 72, 100
(2016).
- Two-Dimensional Photonic Crystals Based on Anodic Porous TiO2 with Ideally Ordered Hole Arrangement
T. Kondo*, S. Hirano, T. Yanagishita, N. T. Nguyen, P. Schmuki, and H. Masuda, Appl. Phys. Express, 9, 102001
(2016).
- Fabrication of Aluminum Nanowires by Mechanical Deformation of Al Using Anodic Porous Alumina Molds
T. Kondo*, T. Kitagishi, N. Fukushima, T. Yanagishita, and H. Masuda, Mater. Express, 6, 363 (2016).
- Facile Preparation of Porous Alumina Through-Hole Masuda for Sputtering by Two-Layer Anodization
T. Yanagishita*, and H. Masuda, AIP Adv., 6, 085108 (2016).
- Formation of Porous Anodic TiO2 with Square Nanoholes by Pretexturing Proess
T. Kondo*, S. Nagao, T. Yanaigshita, and H. Masuda, J. Electrochem. Soc., 156, E206 (2016).
- Polymer Lenses with Antireflection Structures Prepared Using Anodic Porous Alumina Molds
T. Yanagishita*, T. Hidaka, M. Suzuki, and H. Masuda, J. Vac. Sci. Technol. B, 34, 021804 (2016).
- Fabrication of Porous Si Particles by Barrel Anode Etching
T. Yanagishita*, S. Ueno, K. Taniguchi, and H. Masuda, Chem. Lett., 45, 708 (2016).
- Preparation of Ordered Anodic Porous Alumina Through-Hole Membrane and Its Applications
T. Yanagishita* and H. Masuda, ECS Transactions, 75, 21 (2016).
- Functional Optical Devices Based on Highly Ordered Metal Nanostructures Obtained Using Anodic Porous Alumina
T. Kondo, T. Yanagishita, and H. Masuda*, ECS Transactions, 69, 235 (2015).
- Enlargement of Surface Area of Al by Electrochemical Insertion and Deinsertion of Li
K. Nishio*, T. Yanagisihta, M. Yoshida, T. Hayakawa, and H. Masuda, Electrochem. Commun., 59, 13
(2015).
- Hgih-Throughput Fabrication Process for Highly Ordered Through-Hole Porous Alumina Membranes Using Two-Layer Anodization
T. Yanagisihta and H. Masuda*, Electrochim. Acta, 184, 80 (2015).
- Carbon Nanofiber Arrays from High-Aspect Polymer Pillar Prepared by Nanoimprinting Using Anodic Porous Alumina
T. Yangishita and H. Masuda*, Mater. Lett., 160, 235 (2015).
- Surface-Enhaced Raman Scattering on Gold Nanowire Array Formed by Mechanical Deformation Using Anodic Porous Alumina Molds
T. Kondo, N. Kitagishi, T. Yanagishita, and H. Masuda*, Appl. Phys. Express, 8, 062002 (2015).
- Ideally Ordered Porous TiO2 Prepared by Anodization of Pretextured Ti by Nanoimprinting Process
T. Kondo, S. Nagao, T. Yanagishita, N. T. Nguyen, K/ Lee, P. Schmuki, and H. Mausda*, Electrochem. Commun.,
50, 73 (2015).
- TiO2 Hollow Spheres with Nanoporous Structures Fabricated by Anodization of Ti Particles
T. Yanagishita, M. Imaizumi, T. Kondo, and H. Mausda*, RSC Adv., 5, 41830 (2015).
- Fabrication of Highly Ordered Nanoporous Si with High Aspect Ratio Through Prepatterning of Si Using Porous Alumina Mask
K. Nishio*, S. Tagawa, T. Yanagishita, and H. Masuda, Jpn. J. Appl. Phys, 53, 075201 (2014).
- Fabrication of Polymer Antireflection Structures by Injection Molding Using Ordered Anodic Porous Alumina Mold
T. Yanagishita, M. Masui, N. Ikegawa, and H. Masuda*, J. Vac. Sci. Technol. B, 32, 021809
(2014).
- Fabrication of Monodisperse Particles by Nanoimprinting Using Anodic Porous Alumina Molds
T. Yanagishita, M. Kawamoto, K. Nishio, and H. Mausda*, J. Vac. Sci. Technol. B, 32, 011802 (2014).
- Fabrication of Silica Moth-Eye Structures by Photo-Nanoimprinting Using Ordered Anodic Porous Alumina Molds
T. Yanagishita, T. Endo, K. Nishio, and H. Masuda*, Jpn. J. Appl. Phys., 53, 018002 (2014).
- Monodisperse Nanoparticles of Metal Oxides Prepared by Membrane Emulsification Using Ordered Anodic Porous Alumina
T. Yanagishita, Y. Maejima, K. Nishio, and H. Masuda*, RSC Adv., 4, 1538 (2014).
- Fabrication of Porous Si Particles by Electrochemical Etching
T. Yanagishita, M. Imaizumi, K. Nishio, and H. Masuda*, ECS Solid State Lett., 2, P117 (2013).
- Preparation of Monodisprese Hydrogel Particles by Membrane Emulsification Using Highly Ordered Anodic Porous Alumina
T. Yanagishita, M. Kawamoto, K. Nishio, and H. Mausda*, Chem. Lett., 42, 1349 (2013).
- In Situ Template Synthesis of One-dimensional Gold Nanoparticle Arrays in Organic Nanowires
T. Matsushita, Y. Fukumoto, T. Kawakami, T. Tsuruoka, T. Murashima, T. Yanagishita, H. Masuda, H. Nawafune, and K. Akamatsu*, RSC Adv., 3, 16243 (2013).
- Facile and scalable methodology of sublithographic scale uniform nanowires by ultra-thin AAO free-standing membrane
G. Meng, Y. Yanagida*, K. Nagashima, T. Yanagishita, M. Kanai, K. Oka, A. Klamchuen, S. Rahong, M. Horprathum, B. Xu, F. Zhuge, Y. He, H. Masuda, T. Kawai*, RSC Advances, 2, 10618 (2012).
- Cavity-typed hypersonic phononic crystals
A Sato*, Y. Pennec, T. Yanagishita, H. Masuda, W. Knoll, B. Djafari-Rouhani, G. Fytas, New J. Phys., 14,
113032 (2012).
- In Situ Synthesis of Composite Nanowires Consisting of Metal Nanoparticles in Ion-Exchengeable Polymer Matrix Using Porous Alumina Template
Y. Fukumoto, T. Tsuruoka, T. Yanagishita, H. Masuda, H. Nawafune, and K. Akamatsu*, Trans. Mater. Res. Soc. Jap.,
37, 185 (2012).
- Nanoimprinting Process Using Highly Ordered Anodic Porous Alumina
T. Yanagishita, K. Nishio, and H. Masuda*, ECS Transactions, 33, 67 (2011).
- Fabrication of Monodisperse Polymer Nanoparticles by Membrane Emulsification Using Ordered Anodic Porous Alumina
T. Yanagishita, R. Fujimura, K. Nishio, and H. Masuda*, Langmuir, 26, 1516 (2010).
- Fabrication of Two-Dimensional Polymer Photonic Crystals by Nanoimprinting Using Anodic Porous Alumina Mold
T. Yanagishita, K. Nishio, and H. Masuda*, J. Vac. Sci. Technol. B, 28, 398 (2010).
- Preparation of Uniform-sized Polymer Nanofibers by Extrusive Spinning Using Ordered Anodic Porous Alumina
T. Yanagishita, R. Fujimura, K. Nishio, and H. Masuda*, Chem. Lett. 39, 188 (2010).
- Preparation of Antireflection SiO2 Structures Based on Nanoimprinting Using Anodic Porous Alumina Molds
T. Yanagishita, T. Endo, K. Nishio, and H. Masuda*, Jpn. J. Appl. Phys., 49, 065202 (2010).
- Anodic Porous Alumina Masks with Checkerboard Pattern
M. Harada, T. Kondo, T. Yanagishita, K. Nishio, and H. Masda*, Appl. Phys. Express, 3, 015001 (2010).
- Ordered Pillar Array Structures of TiO2 by Nanoimprinting Using Anodic Porous Alumina as Mold
T. Yanagishita, E. Endo, Y. Yamaguchi, K. Nishio, and H. Masuda*, Chem. Lett., 38, 274 (2009).
- Anti-Reflection Structures on Lenses by Nanoimprinting Using Ordered Anodic Porous Alumina
T. Yanagishita, K. Nishio, and H. Masuda*, Appl. Phys. Express, 2, 022001 (2009).
- Optimization of AR structures of Polymer Based on Nanoimprinting Using Anodic Porous Alumina
T. Yanagishita, K. Nishio, and H. Masuda*, J. Vac. Sci. Technol. B, 26, 1856 (2008).
- Antirefrection Polymre Hole Array Structures by Imprinting Using Metal Molds from Anodic Porous Alumina
T. Yanagishita, K. Nishio, and H. Masuda*, Appl. Phys. Express, 1, 067004-1 (2008).
- Fabrication of Hollow Spheres with Porous Structures by Anodization of Small Al Particles
T. Yanagishita, S. Kimura, K. Nishio, and H. Masuda*, Appl. Phys. Express, 1, 084001-1
(2008).
- Two Dimensional Photonic Crystal Composed of Ordered Polymer Nanopillar Arrays with High Aspect Ratios Using Anodic Porous Alumina Templates
T. Yanagishita, K. Nishio, and H. Masuda*, Appl. Phys. Express, 1, 012002-1 (2008).
- Fabrication of Ideally Ordered Anodic Porous Alumina with Large Area by Vacuum Deposition of Al onto Mold
K. Nishio, T. Yanagishita, S. Hatakeyama, M. Maekawa, and H. Masuda*, J. Vac. Sci. tech. B, 26, L10
(2008).
- Antireflection Polymer Surface Using Anodic Porous Alumina Molds with Tapered Holes
T. Yanagishita, K. Yasui, T. Kondo, Y. Kawamoto, K. Nishio, and H. Masuda*, Chem. Lett.,
36, 530 (2007).
- Nanoimprinting Using Highly Ordered Anodic Porous Alumina with Reduced Hole Periods
T. Yanagishita, N. Kumagai, K. Nishio, and H. Masuda*, J. Photopolymer. Sci. Tech., 20, 569 (2007).
- Polymer Through-hole Membrane Fabricated by Nanoimprinting Using metal Molds with High Aspect Ratios
T. Yanagishita, K. Nishio, and H. Masuda*, J. Vac. Sci. Technol. B, 25, L35 (2007).
- Ordered Porous Alumina Geometries and Surface Metals for Surface-Assisted Laser Desorption/Ionization of Biomolecules: Possible Mechanistic Implications of Metal Surface Melting
Y. Wada, T. Yanagishita, and H. Masuda*, Anal. Chem., 79, 9122 (2007).
- Patterning of Self-Assembled Thin Films Using VUV Irradiation through Anodic Porous
M. Harada, S. Murata, T. Yanagishita, H. Sugimura, K. Nishio, H. Masuda*, Chem. Lett., 36, 1266 (2007).
- Polymer Thgough-hole Membranes with High Aspect Ratios form Anodic Porous Alumina Templates
T. Yanagishita, K. Nishio, and H. Masuda*, Jpn. J. Appl. Phys., 45, L1133 (2006).
- Nanoimprinting Using Ni Molds Prepared from Highly Ordered Anodic Porous Alumina Templates
T. Yanagishita, K. Nishio, and H. Masuda*, Jpn. J. Appl. Phys., 45, L804 (2006).
- Fabrication of Metal Nanohole Arrays with High Aspect Ratios Using Two-Step Replication of Anodic Porous Alumina
T. Yanagishita, K. Nishio, and H. Masuda*, Adv. Mater., 17, 2241 (2005).
- Carbon Nanotubes with Triangular Cross Section Using Anodic Porous Alumina as Templates
T. Yanagishita, M. Sasaki, K. Nishio, and H. Masuda*, Adv. Mater., 16, 429 (2004).
- Preparation of Monodispersed SiO2 Nanoparticles by Membrane Emulsification Using Ideally Ordered Anodic Porous Alumina
T. Yanagishita, Y. Tomabechi, K. Nishio, and H. Masuda*, Langmuir, 20, 554-555 (2004).
- 鋳型プロセスにもとづくTiO2ナノ粒子の作製
柳下 崇,佐々木 誠,西尾和之,益田秀樹*,表面技術, 55,34 (2004).
- Synthesis of Diamond Cylinders with Triangular and Square Cross Sections Using Anodic Porous Alumina Template
T. Yanagishita, K. Nishio, A. Fujishima, and H. Masuda*, Chem. Lett., 976 (2002).
- Synthesis of Well-Aligned Diamond Nanocylinders
H. Masuda*, T. Yanagishita, K. Yasui, K. Nishio, I. Yagi, T. N. Rao, and A. Fujishima, Adv. Mater.,
13, 247 (2001).
- Direct Nanomolding of Semiconductor Single Crystals
H. Masuda*, K. Yasui, T. Yanagishita, M. Nakao, and T. Tamamura, Jpn. J. Appl. Phys., 39, 256 (2000).